Bespoke and Commissioned Jewellery

Mosaic Pendant

This was inspired by a mosaic in the ruins of a Byzantine church in Turkey.  It was created using Computer Aided Design and manufactured in solid silver and vitreous enamel.  The step by step process to create this piece can be seen in the CAD-CAM article.  This item can have both pendant and brooch fittings.

Method of Manufacture:  CAD-CAM

Celtic Knot Wedding Ring

One of a pair of wedding rings is shown .  The clients' original matching wedding rings were a light weight, open weave, Celtic design which had not lasted the test of time.  Instead the clients wished to have a heavy weight solid section pair of wedding rings that would last beyond their lifetimes but still had something of the design of their original wedding rings.  These were manufactured in 22ct yellow gold.

Method of Manufacture:  CAD-CAM

Pink Sapphire & Diamond Three Stone Ring   

This ring was manufactured as an engagement ring for a client who had been serving in Afghanistan.  He had purchased a pink sapphire whilst over there with the intention of setting it into a ring however, on inspection, the sapphire was of poor quality and therefore we sourced the far more vibrant stone you see here.  The ring was manufactured in 18ct white gold by hand and was set with a pair of matched Asscher cut diamonds in the shoulders. The rubover set of these diamonds along with the double claws on the Sapphire help to achieve the required Art Deco style.  This really was a stunning ring only surpassed by the young lady's face when she first cast eyes on it.

Method of Manufacture:  Handmade

Daisy Pendant

This pendant was designed for a client who wished to give his wife a gift after the birth of their first child who they had named Daisy.  This was set with a yellow sapphire as the stamen and diamonds in the petals to give the impression of morning dew. 

Method of Manufacture:  Handmade

Sapphire & Diamond Marquise Pendant

This was designed and manufactured for a client in 10 very short days as a very special commission.  The centre stone is a natural 5.64ct stunning blue sapphire.  This then had two 0.50ct diamonds at the top and bottom and two 0.35ct round brilliant cut diamonds on either side.  These were separated by marquise cut diamonds and the main section was articulated from the shackle which also included 3 marquise cut diamonds.  All these diamonds were D colour and flawless clarity.  This was handmade in platinum with a handmade platinum chain and the side decoration was 22ct yellow gold in the shape of a tulip's head which was duplicated in the shackle section.  A very special, completely unique one of item.

Natural Pink Diamond Teardrop Single Stone Ring

This was created for one of our regular clients.  He wished to make a diamond ring for his wife's birthday and he requested a natural pink diamond.  9am the next morning this stone was sitting on my desk!  I immediately knew that we didn't need to hunt any further as the stone was genuinely stunning, a natural light pink which conveyed an honesty in it's sparkle.  This was handmade in 18ct white gold with knife edge shoulders which were deep enough to add strength but thin enough to give the impression that the stone was being held in suspended animation on the wearer's finger.  Stunning simplicity.

Pink Diamond Square Earrings

These earrings were commissioned by the same client as above to create a suite between three separate pieces - the pink diamond ring, a Fope necklet and these earrings.  We therefore used two natural pink diamonds for the centre of the earrings and then, via CAD-CAM, created the block paved design which was to simulate the link pattern of the FOPE necklet as seen here.

Sapphire & Diamond Three Stone Ring

A gorgeous oval, royal blue sapphire flanked by two round brilliant cut diamonds in handmade 18ct yellow gold setting.  This was later supplemented with the pendant below.

Sapphire & Diamond Articulated Pendant

This was manufactured to accompany the above ring.  We followed a similar design to the ring so they could be worn as a set.  The sapphire was a beautiful royal blue colour with two graduating diamonds above.  The pendant is fully articulated with knife edge link bars.

Illustrious Brooch

This was manufactured for an Officer of HMS Illustrious for his wife.  It was manufactured via CAD-CAM and made in silver and gold.

Sunflower Ring

This was made for a client who, quite simply, wanted to wear a sunflower on her finger.  It was handmade in 18ct gold using a cognac diamond for the centre surrounded by yellow sapphires and tsavorites on the shoulders.

Diamond Twist Half Eternity

What you are seeing here are actually three rings together.  This was made for a client who inherited her unusually shaped engagement ring, seen in the middle.  We had previously made the wedding ring, seen at the top, which was shaped to fit and had to follow the same principle for the diamond set eternity ring.  The client also wanted us to try to use this opportunity to help highlight her engagement ring and this is the result.